Product categories: hot melt adhesive
Brand: OAK BOND
Model: OAK - 3920
Color: amber round particles
Operating temperature: 140 ~ 160 ℃
Applicable objects: Edge sealing of manual, semiautomatic curve
Ordering hot line: 400-0088-712
Used for edge banding of manual and automatic machine, paper, melamine, PVC, ABS and other materials on the hardwood, particleboard and MDF board edge banding, excellent wettability, high initial adhesion, long opening time, good liquidity, not wire drawing, good hot stability.
Product Components
EVA resin, viscosity resin, paraffin wax, additives, etc.
Product Features:
1. Wide application: suitable for edge bonding of wood veneer, melamine and PVC, etc
2. Good edge sealing effect , painting is not easy to blister.
3. Not easy to draw a wire in the process of using , It will not pollute the surfaces of tools.
4. High cost performance ratio.
5. High viscosity, high resistance to heat.
6. Excellent wettability, high initial adhesion, long opening time, good liquidity, not wire drawing, good hot stability
Applicable Features
1. Suitable for semi-automatic and manual curve edge banding machine.
2. Suitable for edge banding of paper, melamine on the hardwood, particleboard and MDF board .
3. Suitable for edge banding of PVC, ABS on the hardwood, particleboard and MDF board
Performance Indicators
Synthetic resin solid type
state circle granular
Color: Amber particles
Viscosity (160 ℃) mpa.s 350000
Soften ℃
100 ℃ + 5 ℃
The proportion g/cm2
1.3 + / - 0.1
Scope of Application
Used for edge banding of manual and automatic machine, paper, melamine, PVC, ABS and other materials on the hardwood, particleboard and MDF board edge banding, excellent wettability, high initial adhesion, long opening time, good liquidity, not wire drawing, good hot stability.
Conditions of usage
Material moisture content %
8-10
Room temperature and material temperature ℃ >15
Glue box temperature ℃
180℃-200℃
Glue roller temperature ℃
200℃-210℃
Conveyor speed m/min
10
Pressurized pressure kg/cm2
3-5
Coating amount g/m2
80-250
packaging and Storage
25 kg/bag. Stored inside a cool and dry place, avoid direct sunlight.The shelf life is two years.
Note:
1, Parts needing to edge sealing joint must be clean,There is not any dust and oil pollution, pressing is seal, avoid to produce a certain pressure is insufficient or not average.
2, check the temperature measurement installed on the machine, see whether the temperature made an error.
3, Coating should be uniformly, coating amount will be adjusted because of different materials, Less will cause insufficient strength , more will cause gum line, and make the machinery and material dirty.
4, when the room temperature is below 15 ℃, you are advised to heat the surface of edge sealing and edge sealing
