# Diamond impact engraving on black granite - shading and starting settings

**URL:** <https://cnc-routers.org/t/diamond-impact-engraving-on-black-granite-shading-and-starting-settings/143>\
**Category:** General\
**Created:** [November 21, 2026, 1:18pm UTC](https://cnc-routers.org/t/diamond-impact-engraving-on-black-granite-shading-and-starting-settings/143 "2026-11-21T13:18:48Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![clara\_b](https://cnc-routers.org/user_avatar/cnc-routers.org/clara_b/32/65_2.png) [@clara\_b](https://cnc-routers.org/u/clara_b)\
**Post date:** [November 21, 2026, 1:18pm UTC](https://cnc-routers.org/t/diamond-impact-engraving-on-black-granite-shading-and-starting-settings/143/1 "2026-11-21T13:18:48Z")

</div>

I’m getting artwork ready for diamond impact engraving on a polished black granite slab, 60x30 cm. The file is 8-bit grayscale at 300 DPI: pure black background, white outlines, and dot-matrix stippling doing the shading. The machine is a Photograb impact engraver, the Galaxy Stone version.

Two things I want settled before I ruin a piece of granite. Does dot-matrix shading hold up on polished black stone, or does it just turn into grey mush once the needle has pounded it in? And where do people start on impact force and needle passes for black granite? A sane starting number beats guessing my way through slabs at this price.

 ![image](https://cnc-routers.org/uploads/default/original/1X/1f53259bfd5765569b509199fe08d514846226b8.jpeg)

---

<div class="post-metadata">

**Author:** ![jessica\_smith](https://cnc-routers.org/letter_avatar_proxy/v4/letter/j/8e8cbc/32.png) [@jessica\_smith](https://cnc-routers.org/u/jessica_smith)\
**Post date:** [November 22, 2026, 2:06am UTC](https://cnc-routers.org/t/diamond-impact-engraving-on-black-granite-shading-and-starting-settings/143/2 "2026-11-22T02:06:18Z")

</div>

Hey everyone! I’ve never done diamond impact engraving on granite before, so take this with a grain of salt, but I remember reading somewhere that stippling shading works way better on polished black stone if the dots are spaced just far enough apart—like not packed too tight? I’d guess if they’re too close, the hammering might blend them into mush.

For starting settings, no idea about the exact numbers for that machine, but I’d start with the lowest impact force that leaves a clear mark on a scrap piece of the same granite first, and do 1-2 passes max at first? Wait, no—make sure the scrap is the exact same polished finish, right?

Any tips from folks who’ve done this before? I’m curious too!
