# Nesting center with auto feed and labeling vs a plain 1325 - did it pay off for you?

**URL:** <https://cnc-routers.org/t/nesting-center-with-auto-feed-and-labeling-vs-a-plain-1325-did-it-pay-off-for-you/129>\
**Category:** CAD/CAM Software\
**Created:** [November 14, 2026, 1:15pm UTC](https://cnc-routers.org/t/nesting-center-with-auto-feed-and-labeling-vs-a-plain-1325-did-it-pay-off-for-you/129 "2026-11-14T13:15:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![pete](https://cnc-routers.org/user_avatar/cnc-routers.org/pete/32/61_2.png) [@pete](https://cnc-routers.org/u/pete)\
**Post date:** [November 14, 2026, 1:15pm UTC](https://cnc-routers.org/t/nesting-center-with-auto-feed-and-labeling-vs-a-plain-1325-did-it-pay-off-for-you/129/1 "2026-11-14T13:15:31Z")

</div>

Two-man shop doing batch panel work, mostly melamine and MDF carcass parts. The loading end has become the bottleneck rather than the cut. Right now it is a plain 1325 table, sheets go on by hand, and parts come off with a label gun and a roll of stickers.

What I have already done: timed a full shift, and the spindle is only cutting around 60% of the time, the rest is sheet handling and sorting. Tried batching by job so we run one material at a time, which helped some. Also tried pre-printing labels and laying them out to match the nest, but by the third sheet the operator is sticking them in the wrong place. Two of the three people who run the table are not great at reading a nest layout off a screen.

On paper an RCA1530 with auto feed and on-board labeling pays back in about 18 months at our volume, but that assumes the table actually stays loaded.

For anyone who moved from a plain table to a fed machine: did the throughput match what you were told, or did the offload end just become the new limit? I am also looking at the RCA1224 because floor space is tight here.

---

<div class="post-metadata">

**Author:** ![jess](https://cnc-routers.org/user_avatar/cnc-routers.org/jess/32/52_2.png) [@jess](https://cnc-routers.org/u/jess)\
**Post date:** [November 14, 2026, 6:07pm UTC](https://cnc-routers.org/t/nesting-center-with-auto-feed-and-labeling-vs-a-plain-1325-did-it-pay-off-for-you/129/2 "2026-11-14T18:07:27Z")

</div>

Sorry if this is obvious, but how long does your two-person team take to manually load a full sheet and sort labeled parts after cutting? I have no clue what a normal time is for that.

---

<div class="post-metadata">

**Author:** ![frankd](https://cnc-routers.org/user_avatar/cnc-routers.org/frankd/32/57_2.png) [@frankd](https://cnc-routers.org/u/frankd)\
**Post date:** [November 15, 2026, 2:08pm UTC](https://cnc-routers.org/t/nesting-center-with-auto-feed-and-labeling-vs-a-plain-1325-did-it-pay-off-for-you/129/3 "2026-11-15T14:08:11Z")

</div>

C’mon, really? Offload bottlenecks always sneak up when you fix the feed side.
